View Full Version : 3rd Asian dude with a Camaro
According to Adrian I'm the third anyways. Damn I'm special.
I wrecked my 93 formula in march, likely the saddest day in my life. It was my first fast car and I just didn't know the meaning of cornering with 325ft-lb...
I learned my lesson, an expensive lesson at that.
So now I just bought a 90 Camaro RS, with a 350tpi swap and a t-5 trans, LONG LIVE THE F-BODY
Anyways I'm parting out my 93 formula. I didn't have collision insurance (STUPID STUPID STUPID) so it likely has a clean title. More info is in the parts for sale, "FEELER: 4th gen goodies"
Thanks!
PumpkinPie
06-07-2006, 01:43 PM
welcome :D
This is Pissing me off...
I was just doing a brake flush... when i moved onto the left rear wheel, I snapped the piston mount while losening the release value. After I went and got a new one at lordco, I snapped a bolt (while inside the plate) while putting things back together... so now i can't freaking get it out...
AHHHHHHHHHHHHHHHHHHHHHHH
yeah I REALLY needed this
This is Pissing me off...
I was just doing a brake flush... when i moved onto the left rear wheel, I snapped the piston mount while losening the release value. After I went and got a new one at lordco, I snapped a bolt (while inside the plate) while putting things back together... so now i can't freaking get it out...
AHHHHHHHHHHHHHHHHHHHHHHH
yeah I REALLY needed this
You will soon realize (and adrian can attest to this) that 3rd gens... are...fun. :(
TA_GTA
06-09-2006, 03:37 PM
This is Pissing me off...
I was just doing a brake flush... when i moved onto the left rear wheel, I snapped the piston mount while losening the release value.* After I went and got a new one at lordco, I snapped a bolt (while inside the plate) while putting things back together... so now i can't freaking get it out...
AHHHHHHHHHHHHHHHHHHHHHHH
yeah I REALLY needed this
You will soon realize (and adrian can attest to this) that 3rd gens... are...fun.* :(
3rd gens are fun
allpontiacs
06-10-2006, 05:19 PM
This is Pissing me off...
I was just doing a brake flush... when i moved onto the left rear wheel, I snapped the piston mount while losening the release value. After I went and got a new one at lordco, I snapped a bolt (while inside the plate) while putting things back together... so now i can't freaking get it out...
AHHHHHHHHHHHHHHHHHHHHHHH
yeah I REALLY needed this
You will soon realize (and adrian can attest to this) that 3rd gens... are...fun. :(
Yeah. Just...yeah. I arrow 3 2nd gens for a reason.
Ok... so finally got the rear brakes back together... and moved on to the front brake hoses, whole reason i started this thing.
Now this is after spending 2 hours welding a nut on the other side of the bolt so i can pull it out. (i just got a ARC welder, total amature)
So half way through, the New hoses I got don't fit, different fitting probably due to it having the sport package or whatever... THIS IS GETTING TO BE VERY EXCITING!!!
Chris_88_Camaro
06-11-2006, 02:21 AM
Humm do a LT1 and T56 swap and mabe throw ur diff in as well! its all free parts really! :D
LT1 swaps are easy... jsut ask IROC-Z ;)
Humm do a LT1 and T56 swap and mabe throw ur diff in as well! its all free parts really! :D
ahh... don't tempt me... i kinda wanted to do a T-56 swap.
allpontiacs
06-11-2006, 09:02 PM
Get a big block and a Muncie, fuck LT1 and T56...
Captain Morgan
06-11-2006, 09:27 PM
Ok... so finally got the rear brakes back together... and moved on to the front brake hoses, whole reason i started this thing.
Now this is after spending 2 hours welding a nut on the other side of the bolt so i can pull it out. (i just got a ARC welder, total amature)
So half way through, the New hoses I got don't fit, different fitting probably due to it having the sport package or whatever... THIS IS GETTING TO BE VERY EXCITING!!!
you can do anything with an arc welder if you know what you're doing, which rod to use etc.
allpontiacs
06-11-2006, 09:57 PM
Exactly. You have to fail to win.
Ok... so finally got the rear brakes back together... and moved on to the front brake hoses, whole reason i started this thing.
Now this is after spending 2 hours welding a nut on the other side of the bolt so i can pull it out. (i just got a ARC welder, total amature)
So half way through, the New hoses I got don't fit, different fitting probably due to it having the sport package or whatever... THIS IS GETTING TO BE VERY EXCITING!!!
you can do anything with an arc welder if you know what you're doing, which rod to use etc.
haha, if I know what i'm doing, that's a big "if"
allpontiacs: I'd rather have a 427 small block, and a specially built T5 from a specific company down in the states.
Bing.. yeah.. that would be an idea.. why don't you transfer everything over from the 4th gen? You'd only be paying for labour, and all the money that you'd spend for parts/labour trying to hop up your 3rd gen could be spent on the swap... just a thought.
Zion: HONDA's are fun too.. :noes:
Ford flat-head and a saginaw rock-crusher.
Bing.. yeah.. that would be an idea.. why don't you transfer everything over from the 4th gen? You'd only be paying for labour, and all the money that you'd spend for parts/labour trying to hop up your 3rd gen could be spent on the swap... just a thought.
Definitly a good idea.
Captain Morgan
06-13-2006, 11:32 AM
Ok... so finally got the rear brakes back together... and moved on to the front brake hoses, whole reason i started this thing.
Now this is after spending 2 hours welding a nut on the other side of the bolt so i can pull it out. (i just got a ARC welder, total amature)
So half way through, the New hoses I got don't fit, different fitting probably due to it having the sport package or whatever... THIS IS GETTING TO BE VERY EXCITING!!!
you can do anything with an arc welder if you know what you're doing, which rod to use etc.
haha, if I know what i'm doing, that's a big "if"
heh takes a fair bit of practice
vBulletin® v3.7.0 Beta 6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.