Full length Headers 84TA

[trans-am]

I dont want cheap headers, something good and strong. What would you recommend in full size?

[MonkeyWrench]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D2210%2D1HKR&N=700+115&autoview=sku

but if it's for a street car i wouldn't recommend full length headers on a 3rd gen

[trans-am]

I guess i'll be hitting the collectors all the time with full length

[Captain Morgan]

I guess i'll be hitting the collectors all the time with full length


all the time? every time.
im only running a prokit and i slam my X member on every speed bump if im not so careful

[MonkeyWrench]

yea i was hell bent on getting the 2210's then i found some good pics on how much ground clearance they had and imo i wouldn't put them on a car you plan on driving very often on the street. i op'ed for the 2055's http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D2055HKR&N=700+115&autoview=sku

[93formula]

how come they have long tubes for the 4th gens that have decent clearance but none for the third gen? its the same floor pan.

[matt_p]

Hedman hedders has 1 5/8" primary long tube header that are best suited for our stock engines. They don't go as low, giving more clearance, but they have a huge 3" collector which is too big and hits the t5 tranny. Cutting off the collector and getting a 2.5" one welded on would do the trick.

But you'd still have the problem of no clearance where the exhuast would have to go under the tranny crossmember.

edit: in your sig you have a v6. if so, then ignore my post lol

[79 Z28]

how come they have long tubes for the 4th gens that have decent clearance but none for the third gen? its the same floor pan.
because the floorpan is the same under the driver seat, but the engine bay and the rest of the car isnt lol

[trans-am]

lol i'm doing it anyway

[mousemaker]

He lives in Duncan, if the car isn't dragging something and throwing sparks he won't fit in!

[trans-am]

lol that's fuckin hilarious hahaha

[trans-am]

I just ordered a pair of shorty's, no sparks for me!

[mousemaker]

Ja, but now you won't fit in wit yer cuzins whiteboy, lol!

[crazy]

yea i was hell bent over the barrel http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D2055HKR&N=700+115&autoview=sku


HOLY CRAP !! 3rd and 4th gen Nooby , damn skippy I am ! I thought you all went a little nuts on some other ads talking about $200 for used headers.I buy brand new ones for less.Until I checked this post.My stuff has always been pre 1980 other than my Exploder. Over $400 for headers ............ things are getting a little ridiculous !
:nono: :noes:

[MonkeyWrench]

then i got them coated. :ohboy:

[trans-am]

Ja, but now you won't fit in wit yer cuzins whiteboy, lol!
I'll just drag lucky cans behind my car

[79 Z28]

yea i was hell bent over the barrel http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D2055HKR&N=700+115&autoview=sku


HOLY CRAP !! 3rd and 4th gen Nooby , damn skippy I am ! I thought you all went a little nuts on some other ads talking about $200 for used headers.I buy brand new ones for less.Until I checked this post.My stuff has always been pre 1980 other than my Exploder. Over $400 for headers ............ things are getting a little ridiculous !
:nono: :noes:
thats nothing, FLP kit for 4th gens is $1500.00 USD my sbc ones for my 79 were 800 after coating