Wire size.

[737jet]

I recently picked up a MTX MXA3002. On the Batt, Gnd and remote terminals for the amplifier, there was a sticker that said to use 4 gauge wire. I thought I was running 4 gauge but turns out it's actually 8 gauge. Where can I get this stuff for a reasonable price? Visions wanted $120 for a 4 gauge wiring kit. My Amp is pretty close to the front just under the dash so I really don't need alot in length.

Right now it's powering a 10" JL audio sub in the middle console of my truck. I'd like to run 2 12's with it and throw them in the back one day and use another amp to run the 10. If you guys happen to have a good set of 12's kickin' around let me know.

[attachment deleted by admin]

[79 Z28]

8 is plenty for that 10 setup. especially since its not as long as usual

[Jessev]

just go to AVU and get a few feet of it for a couple bucks
dont need a whole kit.

[Shifty_Capone]

thats a nifty little setup you got in your truck dude

[kness_30]

go to beamriders and grab the 5 feet u need it will only be 10 bucks, and the kits are only 75 for a 4 guage kit at beamriders but the 8 guage should be plenty for ur setup.