Hi there

[89vert383]

Hey, i'm new to the board. Nice site!

[89vert]

welcome to the board but I'm going to have to ask you to change your name ;D

[89vert383]

haha oh sorry,what are the chances of that happening! Btw my name is adrian everyone. So anything interesting ever happen here? eg-car meets, cruises? And are the majority of you from vancouver?

[89vert]

vancouver to A-town,

usually have a couple huge meets, and few smaller 1's
in feb. we filled a few parking lots at Spanish banks
there are a few local sites that attend
www.vancouverfbody.com
www.vancouvermustangs.com
www.bcgbody.com
www.bcsportrucks.com
www.bcdiesels.com

[89vert383]

oh right on, can't wait..Is there anyone on the board from the island?

[89vert]

yes, quite a few,

[TA_GTA]

Welcome, 2 89vert's :eek:

[Jessev]

chevyman is from the island, he has a 383 too!!! not.

welcome. got some bigger pics?

[ridez]

red verts, yay, welcome

[Jessev]

more red thirdsgens, what is this world coming to?

[89vert383]

haha, ya more third gen verts, just dropped a 383 stroker in her. I live in mill bay and just started working at superior engine in duncan about 3 months ago. I love it out here compared to the alberta life lol...chevyman who is he?

[MonkeyWrench]

duncan... interesting

[Jessev]

duncan... interesting

[89vert383]

I really don't know anyone out here, would be nice to meet some people with third-gens....what's so interesting?

[MonkeyWrench]

engine shop.... interesting

[MonkeyWrench]

duncan+engine shop=more interesting

[89vert383]

great shop and all but too bad its in this indian infested town. Some little fucks were poking through my car on friday. Glad I live in mill bay...BTW i'm not racist or anything

[MonkeyWrench]

had any 500 hp 383's with cracked blocks in there recently?

[89vert383]

funny enough one of our clients cracked his .030 over block, how did you know that?WTF

[MonkeyWrench]

now with new 500hp 355?

[89vert383]

by chance his name isn't josh is it?

[89vert383]

if it is but bout I doubt it is, we did some machining on that engine....I doubt you would know him

[MonkeyWrench]

so what done to the motor you did machining to?

[Jessev]

bahahaha...yes, josh = chevyman....o wow

[89vert]

you're getting into the middle of a whole big thing here,

we know josh, he likes to tell "storys",

is this motor hes getting done in the 500hp area?

[MonkeyWrench]

this could either make or break these internets

[89vert]

this could either make or break these internets


huge turning point in "as the internet turns"

[Bing]

I'm so excited to find out :noes:

[drumhawk]

I really don't know anyone out here, would be nice to meet some people with third-gens....what's so interesting?
Nothing interesting about the turd gen crowd here but your stroker engine must haul ass, welcome.

[90_383]

by chance his name isn't josh is it?


lol thats halarious :rofl:

[allpontiacs]

Hoo boy...

[TA_GTA]

:noes:

[350vert]

stock heads, flat tappet with speed pro .030 piston, felpro head gaskets

[89vert383]

haha this is kinda weird,yes we did quite a bit of machining to this engine,and yes it will be in the 5-600 area. .030 over block,h-beam rods, completly redone 2.02 heads shaved and polished. Last time I saw him he was trading a stroker crank for a 350 crank.They keep me locked up in the back..lol

[Jessev]

with walker texas ranger pistons? and a 3/4 race cam?

[Jessev]

and every time he brings in parts can you hear him mumbling "this will show them, this will win my camarogirl, VANCOUVERFBODY WILL PAY!!!" ? cuz then thats definitely him

[89vert383]

and every time he brings in parts can you hear him mumbling "this will show them, this will win my camarogirl, VANCOUVERFBODY WILL PAY!!!" ? cuz then thats definitely him
haha no, he's a cool guy...he was there for most of the work we did. He's running some retro trw flat-tops with valve reliefs. I'll never race him.lol

[Jessev]

did he give you a business card and tell you to call him if you ever need a vacuum?

[89vert383]

no he didn't, obviously makes some good bucks judging by his machining bill

[allpontiacs]

Or he just has a steep limit on his credit card. He's a proven liar around these parts. I wouldn't bank on it making anywhere near an honest 500hp, at least not until I saw specs on every part that went into it.

[89vert383]

Or he just has a steep limit on his credit card. He's a proven liar around these parts. I wouldn't bank on it making anywhere near an honest 500hp, at least not until I saw specs on every part that went into it.
lol, he paid cash...He's bringing the engine back once assembled for a engine dyno and break-in

[allpontiacs]

Good, I wish I could be there to see him cry. Wait, he's putting it together? Yeah, he's definetely going to be crying. It'll either make 300 if he's lucky, or it'll go boom.

[89vert383]

all he has to do is drop in the crank,cam and install the heads.lol

[allpontiacs]

We found out who you are, you douchebag. Might as well drop the act now, chevygirl.

[90_383]

HAHAHAHAHA priceless

[chevyman]

took you long enough, man I got a kick outta that LOL

[allpontiacs]

Hi, my name's montana, lady explicit is awesome. You moron, every dumb fuck who pulls that tries to say HA HA IT WAS ALL A JOKE YOU GUYS but they're only fooling themselves.

[90_383]

i was thinking the same thing , he didnt want to get caught he just wanted to blow up his own ass to sound like hes not a lier. but to do that he had to lie :ohboy:

[90_383]

chevyman aka 70RS aka 383vert

[chevyman]

minus 70rs.....Z06fury

[Bing]

you make drumhawk look like an genius

[90_383]

lol thats awesome

[350vert]

stock heads, flat tappet with speed pro .030 piston, felpro head gaskets


I fuckin called it lol

[350vert]

all he has to do is drop in the crank,cam and install the heads.lol


obviously doesnt know how to build an engine

crank goes in before pistons and rods fuck nut

[chevyman]

all he has to do is drop in the crank,cam and install the heads.lol


obviously doesnt know how to build an engine

crank goes in before pistons and rods fuck nut
it's not mine man

[Bing]

NO WAIIII, CUS I TOTALLY THOUGHT THAT WAS YOURS

[90_383]

all he has to do is drop in the crank,cam and install the heads.lol


obviously doesnt know how to build an engine

crank goes in before pistons and rods fuck nut
it's not mine man


lol but your still the one that typed it

[chevyman]

vf is hoppin today ;D

[90_383]

wonder why ?

[Jessev]

took you long enough, man I got a kick outta that LOL

took long enough? it was 18 posts you idiot. i thought about it earlier but needed paul to come on and verify

[Dizzle]

you are a fag. go off yourself.

remember, its down the road.... not across the street.