For the 4x4 guys

[camarokid]

This is my dads baby weve been working on for the past 5 or 6 months,
its a fully custom TJ, with a CJ-7 front clip, its wheelbase was extended about 7 inches or so, it has a crate 350 pushing 330 horse, 5.13 gears in the back with spool. 700r4, b&M shifter, tons and tons of hours went into fab work to to do the lengthening and the shackle reversal, shock mounts and countless oother touches,

here she is,

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures068.jpg starting point, after a little grinding and cutting

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures081.jpg

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures087.jpg donor jeep,

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures088.jpg

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures144.jpg amazing what a little gravel guard will do, and one of dads buddys

http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures149.jpg
http://i239.photobucket.com/albums/ff44/Slader-50/cdpictures150.jpg
http://i239.photobucket.com/albums/ff44/Slader-50/P7220106.jpg

[Dunout]

that looks crazy!

[TA_GTA]

that looks crazy!

[CamaroGirl]

pure awesomeness

[allpontiacs]

Not bad. Are you actually going to be wheeling it? Those aren't the stock diffs I hope...

[Dunout]

i think hes just going to cruse in it .... lol

[MonkeyWrench]

5-6 months only took me two....

good looking job tho

[90_383]

nice jeep , good job

[Dunout]

ryan show pics of ur truck finished!

[MonkeyWrench]

i did in my thread. well still needs bit of body work and paint but thats not my department

[Dunout]

oic my car goes under the knife for the last time september 1 its all books and ready to go

[MonkeyWrench]

sweet

i still never pulled my old motor out my car might just bring it to the meet.

[camarokid]

Not bad. Are you actually going to be wheeling it? Those aren't the stock diffs I hope...

its going to wheeled hard core lol, its going to Moab next year, but next to go on it is the exo cage and the big ass waren winch, plus those baby tires are getting replaced by a nice ol set of 40's...

and those are far from stock diffs,pretty sure its a 44 up front, not sure about rear.

and as for the colour combo, were thinking Bright orange body, and metalic purple exo cage, just two colours that really pop,
that way at least when it rolls over it'l look good doing it,

ill post more pics as we go along.

[90_383]

lol right on

[ridez]

5-6 months only took me two....

good looking job tho

not everyone works as fast as you though

[camarokid]

we worked on it maybe a few hours every few nights,
its been a no rush job,

hopefully it'l be done enough to drive before the end of summer tho,

[iroc22]

its going to wheeled hard core lol, its going to Moab next year, but next to go on it is the exo cage and the big ass waren winch, plus those baby tires are getting replaced by a nice ol set of 40's...

and those are far from stock diffs,pretty sure its a 44 up front, not sure about rear.



That is a D44 up front, and the rear is a 9" Ford

Also that's a YJ not a TJ

[allpontiacs]

Both of those diffs are going to eat themselves alive with 40's if you wheel it. Better stick with 35's...or upgrade to better diffs.

[camarokid]

That is a D44 up front, and the rear is a 9" Ford

Also that's a YJ not a TJ

lol sorry boys, the brain dosnt function to well at 1 am,

the diffs are far from stock, but we were thinking that too with the tires. were prolly just going to stick with the 35's till at least end of summer, see how she wheels first.

[mongoose]

Both of those diffs are going to eat themselves alive with 40's if you wheel it. Better stick with 35's...or upgrade to better diffs.

rockwells?

[MonkeyWrench]

60's will handle 40's in a jeep

[iroc22]

Those diffs are more than enough for 35's. There's guys running 35's on locked D44A's, 8.25's and D30's in heavier Cherokees without issue. You'd get away those diffs and 40's in a shelled YJ with better shafts

[SurreyStang]

nice