Do you have an ENGINE FOR SALE?

[ThePhoenix]

I think I may be in the market soon, so POST WHAT YOUVE GOT!

[allpontiacs]

What kind of an engine? I've got a short block 1-piece RMS Chev 350 for rebuild, standard bore.

[bcash]

talk to bud off the gbody site, he but my smallblock that yanked tire, also he just finished my bbc, i recomand him over anyone.....ive gone through 6 motors in my cutty, then had him build my smallblock first, i beat the shit out of it since i first turned the key, now its in the truck on 24z and ive NEVER had any problems...number one with me, he has a few 350z from 300hp and up starting at $1400! carb to pan

[bcash]

i dropped off 10k and told him to build me a a BBC i should be running 10z, buck kenny wanted 17k to build the same motor!

[ThePhoenix]

Thanks for the referral

If anyone has an engine ready to drop in for sale, please post here!

[bcash]

he has about 5, call him right now, 778-686-7139 tell him brandon gave u the number

[90_383]

http://vancouver.en.craigslist.ca/pts/784984461.html

[90_383]

http://vancouver.en.craigslist.ca/pts/735986706.html

[Frosted_Monster]

i have a rebuilt 1989 305 tbi 4sale

[IROC-Z]

TPI 305 with 90k on it $1000/ LT1 complete with harness and ecu $1500 / LS1 + 6spd swap $5000/ Complete running carbed 350 with about 285hp $700 or $1000 with th350 trans in good working condition

[Dunout]

tho are good prices how much u charge to do an LS1 swap?

[ThePhoenix]

I am actually leaning towards TPI now that you mention it.

The engine would be going into my 81 SS Clone

<---thats it

[Jessev]

What kind of an engine? I've got a short block 1-piece RMS Chev 350 for rebuild, standard bore.

[Jessev]

talk to bud off the gbody site, he but my smallblock that yanked tire, also he just finished my bbc, i recomand him over anyone.....ive gone through 6 motors in my cutty, then had him build my smallblock first, i beat the shit out of it since i first turned the key, now its in the truck on 24z and ive NEVER had any problems...number one with me, he has a few 350z from 300hp and up starting at $1400! carb to pan
when you type like this, people will think you have mental issues. there is a difference between "s" and "z". for a reason.

and what the fuck does this, "he but my smallblock that yanked tire", mean?

[Dunout]

hes gangster jesse hes got a tranny painted on his trunk if thats the same guy ?

[IROC-Z]

tho are good prices how much u charge to do an LS1 swap?

Theres no real set price as you can just buy mounts and stuff it in with a modified harness that works and some fuel fitting adaptors and such or you can spend lots of money making it really clean

[CamaroRobZ28beer]

crabed 350 would be your best bet

[TA_GTA]

hes gangster jesse hes got a tranny painted on his trunk if thats the same guy ?

wrong guy, this is the guy with the two tone cutlass

[TA_GTA]

when you type like this, people will think you have mental issues. there is a difference between "s" and "z". for a reason.

and what the fuck does this, "he but my smallblock that yanked tire", mean?

im guessing its "he built my smallblock that does good burnouts"

[Jessev]

which two-tone cutty? the blue and silver with the sweet burnout pic on VM? maybe?

[TA_GTA]

yup, thats brandon

[Dunout]

wrong guy, this is the guy with the two tone cutlass

Perry knows his stuff

[90_383]

perry knows everyones stuff

[TA_GTA]

ivan & eric know i know my stuff

[TA_GTA]

perry knows everyones stuff

SHHHHH!

[90_383]

lol ok , i wont tell anyone else

[TA_GTA]

good

[bcash]

when you type like this, people will think you have mental issues. there is a difference between "s" and "z". for a reason.

and what the fuck does this, "he but my smallblock that yanked tire", mean?

lanched it with slicks and it pulled the front wheel off the ground

[bcash]

hes gangster jesse hes got a tranny painted on his trunk if thats the same guy ?
for the last time i DONT own that gay monte, i own the cutlass



http://i69.photobucket.com/albums/i67/glocked_up/burner.jpg

[Jessev]

lanched it with slicks and it pulled the front wheel off the ground
so yanked tire = pulled wheels. got it.

[90_383]

lol yea , that monte is fugly

[ThePhoenix]

youre thinking of "b" on bcgbody

[mongoose]

which two-tone cutty? the blue and silver with the sweet burnout pic on VM? maybe?

hes whoring my pics on vm too?

[ThePhoenix]

lol?:confused:

[ThePhoenix]

Ok my debt is paid off, and I just got the bad news on my 81 monte that had an engine fire.

The fire was a lot hotter than I or anyone else thought. My BRAND NEW Holley carb that was installed a week before the fire has apparently MELTED into the Edelbrock Torker intake I bought off dwayne.

All the seals in my block are melted. Im looking at a complete rebuild, OR dropping in something else instead.

Heres what I want: I want a 305 or 350 SBC. I want 10.5:1 compression. I want High Output... Is there anything else I want? fuck I cant think right now....

[Moonlight]

i have a blown 305.

[bcash]

blown, or blown up

[SmokeShow]

I'll have a complete 305 TPI swap including a 700r4 transmission that are in great shape with about 150,xxx kms in about a month. Swap will include wiring, computer, serpentine belt system, mounts, exhaust manifolds and pretty much anything bolted to the engine before it comes out of my 88 camaro.

$1000 for it all.

[Frosted_Monster]

400obo camaro rebuilt 305tbi with about 6hrs of run time since rebuild willing to throw in the harness n comp if needed

[ThePhoenix]

I'll have a complete 305 TPI swap including a 700r4 transmission that are in great shape with about 150,xxx kms in about a month. Swap will include wiring, computer, serpentine belt system, mounts, exhaust manifolds and pretty much anything bolted to the engine before it comes out of my 88 camaro.

$1000 for it all.

wow. You have my attention.

But i wont need the tranny.

What would you charge for just the TPI, intake, computer, wiring, etc?

[SmokeShow]

well I cant use the transmission at all and really just want everything gone

so if you take it all, including the transmission, no less then $900

since you dont need the tranny, you can sell it and make some money back. I'll let you deal with it lol :)

[Brisk]

I've got a 350 TPI supposedly pulled from an '89 bird, complete with wiring harness, intake, tpi, distributor, heads, manifolds, etc. rebuilt with a federal mogul rebuild kit, bored .030 over, new timing chain, etc. etc.

pm me if interested.

[ThePhoenix]

supposedly.... but you dont really know do you?

how long have you had it sitting around?

[iroc22]

doesn't matter, there is no difference between the L98s. Only if it's MAP or MAF.

[SmokeShow]

305 TPI and 700R4 with wiring and computer will be available in roughly a week

218'000kms, runs great, can still be seen running but not for long

are you still interested?

[ThePhoenix]

I actually found a freshly rebuilt 350, with brand new patriot heads

[allpontiacs]

HAHAHAHAHA love the tag

[Dunout]

HAHAHAHAHA love the tag

hahaha mint

[ThePhoenix]

:rolleyes: