needed - TBI

[89RS]

Anyone know wher ei can get a 05 or 350 TBI ASAP????

[IROCNParts]

Anyone know wher ei can get a 05 or 350 TBI ASAP????


Ive got a couple 305 TPis, if I were you id use the bottom end of the tpi and just put your intake on it.. that way I can sell it to you cheaper... if not I will have a TBI in next week. call me @ 604-339-8627

[89RS]

no 350 TBI's? also, is there any customization involed in using the bottom end of the tpi 305 with the intake from a 305 tbi?

[IROCNParts]

no 350 TBI's? also, is there any customization involed in using the bottom end of the tpi 305 with the intake from a 305 tbi?


they never made a 350 TBI
and no it should bolt right together

[89RS]

there is a 350 TBI, just not from a camaro...came in late 80's early 90s chebby pickups. i hear they swap straight in.....

[Jinks]

my buddy has a 350 tbi in his 92 yukon .. but you can't have it :)

[89RS]

damn........WHY TO YOU TELL ME THESE THINGS :P

[IROCNParts]

my buddy has a 350 tbi in his 92 yukon .. but you can't have it :)


ahh good point, the camaros never came with 350 tbis

[Chris_88_Camaro]

the ports on the 305's TBI is like 1 7/8 i think the 350 TBI is 2" so the blades would catch on the intake, if u could machine a spacer to 2" and use a 350 TBI it should work fine, jsut make shure that the wiring is the same, some of the trucks used a different TPS and possably diffrernt IAC connections

[89RS]

thx chris...appreciate it....now to find some good ones...

[iroc22]

All 265/305/350 TBI engines used the 1 7/8 TBI units. Only the 454 was a 2" unit.

There is no problem whatsoever bolting your TBI intake on a TPI long block. It would get rid of your crappy heads that way too.

[89RS]

I'm simply looking at transplanting this engine into my car, and selling (it is already for sale :P) Which o you think would perform better...a tpi 305 bottom end with the tbi intake, or the 350 tbi? Also, is it possible to put the tbi intake on a tpi 350 long block?

[Drakar]

any bottom-end without the TBI "swirl port" heads would preform better, so either a long block from a 305 or 350 tpi would be much better.

[89RS]

Mike, any 350 TPI long blocks kicking about? ;D ;D

[iroc22]

You'll need a ESC and 350 knock sensor to toss in that 350 and make it run right. You might just a bit lean with the 305 injectors on the 350...might want to grab a AFPR or 350 injectors.