PDA

View Full Version : new here!


T-spot
02-22-2005, 10:26 PM
This is my car

[attachment deleted by admin]

Underworld Defender
02-22-2005, 10:39 PM
welcome to the board.
i saw a car like yours at the meet on sunday.
was that u?

NorhternSS
02-23-2005, 09:00 PM
Any specs or info on your car?? Any mods?? Looks good man :up:

T-spot
02-23-2005, 10:10 PM
welcome to the board.
i saw a car like yours at the meet on sunday.
was that u?
yeah! I have a few bugs to work out, so it was only a permit. but what a great day! just insured it today....sure missed driving it!(parked since Sept)

T-spot
02-23-2005, 10:21 PM
Any specs or info on your car??* Any mods??* Looks good man :up:
thanks! 1986, 305 F engine, 58mm throttle body, k&n's, super coil, cut out airways, adjustable fuel reg, stage ii trans kit(700r4), hammer shifter, 3:73 posi (Richmond Gear), subframe ties (welded and bolted), kyb agx adjustable front struts, rear koni shocks, boxed arms, lotsa Energy bushings, Weld Draglight wheels,3" exhaust-4" tails (hooker), fresh paint and the hood is all steel, except for the center piece. it was more work, but the fit is better and the shop did an awsome job on the cutout. a new 350 is half way done....waiting for the new intake to arrive!! should be done in the next 2 months or so. :cool:

CamaroRobZ28beer
02-24-2005, 01:52 AM
welcome

NorhternSS
02-24-2005, 08:03 AM
Wow that's a pretty impressive list you got there. Must be a blast to drive.

82firebird
02-24-2005, 11:03 AM
yea man thats a sweet ride you got there keep up the good work.

importslayer
02-24-2005, 08:04 PM
Ya nice Car. We gots the same hood.

T-spot
02-24-2005, 11:38 PM
Ya nice Car. We gots the same hood.
Cool! like to see a pic of yur car!!

T-spot
02-24-2005, 11:43 PM
Wow that's a pretty impressive list you got there.* Must be a blast to drive.*
well....I never exceed the posted limits...... :naughty: it does stick well to the road though!!

T-spot
02-24-2005, 11:46 PM
yea man thats a sweet ride you got there keep up the good work.
thanks! I will be sure to .... I'm thinkin' a new fuel pump this weekend.( high volume :cool:!)

T-spot
02-24-2005, 11:48 PM
welcome
thanks dude...and your car is????

importslayer
02-25-2005, 08:18 PM
Ya nice Car. We gots the same hood.
Cool! like to see a pic of yur car!!


Theres some pics.

http://www.vancouverfbody.com/forums/index.php?topic=4527.15

drumhawk
02-26-2005, 01:47 AM
Nice car and the hood is sweet, where do you roll-out from?

Mr. TroPiCal
02-26-2005, 06:49 PM
Nice car and the hood is sweet, where do you roll-out from?

ROLL OUT
ROLL OUT

T-spot
02-26-2005, 07:40 PM
Nice car and the hood is sweet, where do you roll-out from?
Vancouver, and thanks! I'm pretty proud of the hood too.! pretty vague profileyou got there....whatchya drive?? :cool:

drumhawk
02-27-2005, 05:22 AM
pretty vague profileyou got there....whatchya drive?? :cool:
You just reminded me to add my sig, thanks.* :up: Need more room in the sig, I ran out. :cool:

T-spot
02-28-2005, 07:08 PM
pretty vague profileyou got there....whatchya drive?? :cool:
You just reminded me to add my sig, thanks.* :up:* Need more room in the sig, I ran out.* :cool:
NICE!! :fingersx:

66chevyIISS
03-01-2005, 09:24 AM
wow no response from Jason yet on how he would beat him :) haha


welcome!

79 Z28
03-01-2005, 10:10 AM
wow no response from Jason yet on how he would beat him :) haha


welcome!
pffft, how bout me whoopin you, mr. rearend isnt gonna save you :D

T-spot
03-01-2005, 11:49 PM
wow no response from Jason yet on how he would beat him :) haha


welcome!
hey thanks! well, the holley high performance fuel pump is in!!! runs better, and quieter.....and uhh, who's beatin who?? Who's Jason? Nice ChevyII by the way! :cool:

79 Z28
03-02-2005, 08:50 AM
im jason :D

T-spot
03-02-2005, 08:14 PM
im jason :D
Hello Jason! sounds like an awsome 79!! ya ever bring it out?? :noes: Don't believe I've seen it yet. :cool:

79 Z28
03-03-2005, 08:51 AM
im jason :D
Hello Jason! sounds like an awsome 79!! ya ever bring it out?? :noes: Don't believe I've seen it yet.* :cool:
no its been off the road for about 16 months now. will be done in a couple of months. shes gonna be a quick one :D

66chevyIISS
03-03-2005, 09:08 AM
you haven't see it because its just shiney stuff on a stand. You will see it in 2007!* *:rofl:


and thanks for the compliment T-spot

79 Z28
03-03-2005, 09:19 AM
you haven't see it because its just shiney stuff on a stand. You will see it in 2007!* *:rofl:
keep talking lol, your time is almost up :D

IROCNParts
03-03-2005, 09:24 AM
you haven't see it because its just shiney stuff on a stand. You will see it in 2007!* *:rofl:
keep talking lol, your time is almost up :D


I was one of the last people to see it on the road
and on the road we mean on the side of highway 1 :kekeke:

79 Z28
03-03-2005, 09:27 AM
yea, laugh it up, you guys hurt my feelings. :'(

it was my own personal way to force modify the setup :gay:

T-spot
03-03-2005, 10:57 PM
im jason :D
Hello Jason! sounds like an awsome 79!! ya ever bring it out?? :noes: Don't believe I've seen it yet.* :cool:
no its been off the road for about 16 months now. will be done in a couple of months. shes gonna be a quick one :
Hey, I understand......I got my own fare share of "gotta do's " to get mine up to par too! :sanchez: Now mine looks good, but does it have enough muscle??(will it ever?!) headers and a new Y pipe this weekend.....it never ends! :doh:

79 Z28
03-04-2005, 09:13 AM
oh mines beyond par, its at the situation where parts are 1000's not 100's :noes: 66chevyIISS seems to think its a racecar, but its really a street car. he just keeps telling himself that for some self justification when i wax him :D

i need to get a dual 3" mandrel setup only about 2 feet on each side to go to the 5" race mufflers from the collector to the muffler flange, no tails, dumped at the diff. wont fit anymore anyhow needs to clear the ladderbars. should be interesting to fit that in there :noes:

T-spot
03-04-2005, 09:54 PM
lemme know if ya need a hand with that exhaust system.....would be a fun one! I don't have a mandrell bender, but I can get the prebent pieces and weld them together if it works for you. :cool: or, because the bends would be so slight, I could just make them anyways....the bender doesn't crimp off any flow below a 30 degree bend anyways. :sanchez: