Sub Boxes

[89vert]

I build custom sub boxes to factory spec. Anyone want one let me know. I'll beat Beam Riders pricing.

[79 Z28]

I build custom sub boxes to factory spec. Anyone want one let me know. I'll beat Beam Riders pricing.


i do too, sorry. not for me ;D do you have a table saw and dato blades?

[89vert]

I build custom sub boxes to factory spec. Anyone want one let me know. I'll beat Beam Riders pricing.


i do too, sorry. not for me ;D do you have a table saw and dato blades?

got it all, my dads a carpenter
Do you know the formula for box volume?
I know a good book if you want. I also no a progam you can get. Boxes to spec make a huge difference. I put 2 Jl w0 12's and a 400 watt clarion amp in my girlfriends truck it hits 139.9 db. Last comp. I was at only one guy beat me, but he had 4 15's

[Blue89rs]

I build them as well. 2x8's, 2x10's or 2x12's in a box like CrazyCanadians. $100US~$130CAN.....flexible.

I also do custom fiberglass stuff like kickpods, dashpods, subenclosures, dashpieces.

If you're nice I'll even deliver for free. :D

[Blue89rs]

Building boxes to meet speaker Thiele/small specs does help, but nothing beats proper box placement. Loudspeaker Design Cookbook is the best if you don't mind doing the math. However, results will not match calculated frequency responsed due to the fact that the calculations are based on free air box placement. Cabin lift starts at 100Hz 0dB gain and hits 20Hz +20dB gain. But results always vary because not all cars have the same cabin volume or dimensions, which determines the lift and standing wave arrangements. Any questions?

[89vert]

Building boxes to meet speaker Thiele/small specs does help, but nothing beats proper box placement. Loudspeaker Design Cookbook is the best if you don't mind doing the math. However, results will not match calculated frequency responsed due to the fact that the calculations are based on free air box placement. Cabin lift starts at 100Hz 0dB gain and hits 20Hz +20dB gain. But results always vary because not all cars have the same cabin volume or dimensions, which determines the lift and standing wave arrangements. Any questions?

No ?'s. I got the book. Bass Box is a good computer program.

[Blue89rs]

Totally agree. Bass box is one of the best that I've used so far. Some times I whip out my BoxPlot, which is an old DOS response plotter. Works pretty well but is limited. Its not setup to handle 3rd order or higher box designs.

[franchuk]

Allrite u BaSS ballers out there,

who will build me a sub box for a droptop vert, i know its not exactly the best for sound. But quote me a price, and if possible i'd like to get 2 10's in the small ass trunk.

[attachment deleted by admin]

[attachment deleted by admin]

[Blue89rs]

bring it down here! No job, no resposibilities = good deal for you!

[89vert]

I'll build it

Cheap, cheap ;D

but I live in Burnaby :-\ you live on the island don't you?

my system its 2 10's the amp is much bigger now ;D

[attachment deleted by admin]

[attachment deleted by admin]

[franchuk]

Ya i live on the island but i ocasionally go to Van for sushi, comp parts etc..

anywho

since i dont have any subs exceptfor a kenwood 350 watt amp, and also a pinoneer amp that came with my car. I would want decent bass but i also wouldnt want to upgrade again right away, can anyone tell me if ChevyGuy LUkes subs hes sellin, if there any good?

[89vert]

IMO go Alpine, go Rockford, or go home ;) JL good too ;D

you got a vert if you want it to pound you need high end subs with high end power

your opinion of decent bass and mine might be different but personally I wouldn't get a sub that retails for less than $250 for a 10" and $400 for an amp to drive 2 10's, with my alpine Mrd-m500 and 2 type R 10's it sounds real clean and the bass is fairly insane with the top up with the top down it sounds good with my old mrd-m300 amp bass was lacking with the top down, you may be happy with less bass, I have very high expectations when it comes to bass

[franchuk]

lets just say between flow bastard, and somthing like that, it would be wicked.

[91firebird]

i'v got a 1991 firebird hard top and 2 12" subs i want a custom box built for in the lower trunk area.. how much would that cost or would it be possible to put 2 12"s down there? let me know

[89vert]

heres a pic of my junk
check your messages

[attachment deleted by nin97...if there\'s a problem there\'s a hooker somewhere that might want to listen to you]

[3.4ltr huntin]

i wanna mount a single 10" sub with 2 6*9's in the rear hatch, what kinda price would i be looking at?

[91firebird]

that ain't junk type r subs are wicked if those are type r heh dude my shit sucks i worked and still good friends with people at north shore audio video so i picked up cheap shit from there concept subs worth like 90 apeace and a sony 1000w amp for like 100 ;D sounds alright i guess...

[91firebird]

heres my junk ;D wires fucking everywhere :P

[attachment deleted by nin97...if there\'s a problem there\'s a hooker somewhere that might want to listen to you]

[89vert]

xplode amp sorry to hear that, i've had good experience with concept stuff, they're alright
when i say junk I don't mean actual junk

[91firebird]

hah yea your shit rules man ;D yea sony blows

[89vert]

i wanna mount a single 10" sub with 2 6*9's in the rear hatch, what kinda price would i be looking at?

check messages

[CamaroRobZ28beer]

how much for a 2 12 box man?

[89vert]

how much for a 2 12 box man?

check messages

[89vert]

few more system pics

[attachment deleted by admin]

[89vert]

i really have to vacuum my trunk, first time i've opened it in like 2 months

[attachment deleted by admin]

[89vert]

another box i built, for my girlfriend's jimmy
http://www.bcgbody.com/forums/attachments/pics_001.jpg
amp is hidden in side the box
http://www.bcgbody.com/forums/attachments/pics_002.jpg
the box is custom built to fit around the wheel well
http://www.bcgbody.com/forums/attachments/pics_003.jpg

[91firebird]

man i want those subs ! can u get them cheap anywhere? do u get any discounts?

[89vert]

i can get u an ok deal at A&B Sound,
the more you spend the more you save I've dropped like $6000 there over the years so i get a smokin deal,
if i bring you to the guy he won't charge you retail :-\

[91firebird]

cool cool.... like there $250 or something a sub i saw on one site i can't afford that shit haha ... think i mgiht try making a box myself so i can save myself some money but do u know where i can get any plans ? grr.. and recommendations on a deck? mine doesn't play burned cds :(

[89vert]

try like $399 :)
plans ???, i don't use plans, just figure out the volume and wing it
decks i like alpine, eclipse make nice stuff, and u can't go wrong with panasonic
pioneer are good decks but i don't like the controls or settings

[91firebird]

hmm the box i'm thinking on making is wood then with a plexie glass top... i don't trust myself doing it so i might end up getting u to do it lol

[89vert]

plexie glass top is more money
cause i'll have to make it look pretty on the inside :)

[91firebird]

hahah damn it i just made my car payment i have 180 to last me until 2 weeks from now hah yes i'm screwd

[Shifty_Capone]

How much for a box and not just a base plate? to fit subs into for either 2 10's or 2 12's

[fatso]

Here's a little something I threw together for some friends.
http://dschellenberg1.photosite.com/Album1
I'd be happy to answer any questions as best as I can.

[89vert]

Here's a little something I threw together for some friends.
http://dschellenberg1.photosite.com/Album1
I'd be happy to answer any questions as best as I can.

looks a little more than threw together,
takes days and weeks to do some of that
people pay thousands for that shit
very nice work, you do it for a living

i won't even consider building a box that take more than a day

[fatso]

I've been doing it for a while, it seemed like the only way for people to take me seriuosly when I offer to help. ;)