mike. MORROSO OIL PANS

[87CAM_406CI_SS]

Hey mike i finaly joined your site.
Adam told me you might know the answer to my problem.
I decided to upgrade my oiling system so i bought a kickout oil pan, my problem is i dont know if i will have enough room because of the way that the exhaust runs under the motor.
Do you think it'll fit?
if you want me to take a picture of the pan let me know
thanks

[IROCNParts]

Hey mike i finaly joined your site.
Adam told me you might know the answer to my problem.
I decided to upgrade my oiling system so i bought a kickout oil pan, my problem is i dont know if i will have enough room because of the way that the exhaust runs under the motor.
Do you think it'll fit?
if you want me to take a picture of the pan let me know
thanks

what kind of exhaust are you runnin? what kind of motor? and ya sure a pic would help, I think it should be ok,
but lets take a loook

[Ta88gta]

Ha. The anwser is hell no. Same pan im running and i had to run the cross over under the torqe converter. With that pan your left with barley 2 inches between the pan and the cross member. You might be able to flaten the pipe and run it through there but it will rattle forsure.

[Ta88gta]

oh and if you are gonna try and put the motor and tranny in together with that pan on... Dont. The kickouts on the pan make it a huge pan in the ass to drop in together and you'll end up denting the shit outta the pan. It looks like it will fit with tons of room but trust me it doesnt.

[87CAM_406CI_SS]

I guess Id better scrap that idea.
Im going for the stock pan and a stock volume/high pressure pump. :-\
Anyone have any ideas to inprove my oiling system on a 406ci small block?