FS TPI 305 complete

[IROC-Z]

TPI 305 complete with wiring harness and comuter with 5spd prom. This motor ran high 13's in my camaro. It has 120,000 kms on it and is the original motor in my car. Has always been run on synthetic fluids and way over maintained. This engine includes a Holley FP reg ($110), crane gold race 1.6 rockers ($500), the upper plenum has been ported and the runners have been port matched and polished both inside and out.

Making way for new motor

Open to offers

[79 Z28]

heh finally plans are about to commence ;D

[Bristol]

A little off topic but whats going back in??? ;D

[79 Z28]

A little off topic but whats going back in??? ;D


top secret fo shizzle

[turbosonoma]

lol yeah should be done for fall 2006


heh finally plans are about to commence ;D

[95z28]

wow, your finally going to yank that motor out...you've been talking about for a while...I was about to start calling you byron ;)

[IROCNParts]

wow, your finally going to yank that motor out...you've been talking about for a while...I was about to start calling you byron ;)


he said he was going to yank it out, he never said it would actually get another back in
lol
At least byrons made it down the trakc a few times

[89vert]

TPI 305 complete with wiring harness and comuter with 5spd prom. This motor ran high 13's in my camaro. It has 120,000 kms on it and is the original motor in my car. Has always been run on synthetic fluids and way over maintained. This engine includes a Holley FP reg ($110), crane gold race 1.6 rockers ($500), the upper plenum has been ported and the runners have been port matched and polished both inside and out.

Making way for new motor

Open to offers

are you willing to sell just the rockers

[IROC-Z]

TPI 305 complete with wiring harness and comuter with 5spd prom. This motor ran high 13's in my camaro. It has 120,000 kms on it and is the original motor in my car. Has always been run on synthetic fluids and way over maintained. This engine includes a Holley FP reg ($110), crane gold race 1.6 rockers ($500), the upper plenum has been ported and the runners have been port matched and polished both inside and out.

Making way for new motor

Open to offers

are you willing to sell just the rockers

let me see if I can find the stock one's to put back in and I'd be willing

you know that 90 integra I bought from ICBC last week?...

you didn't think I was gunna actually sell the B18A1 out of it did you? hehe ;)

Lets just say that the 6spd isn't the only thing that came out of the 4rth gen thats going in my car....

[beerslut]

Ok, so how much exactly for the whole engine?
Sean
Beerslut77@hotmail.com
Cheers

[turbosonoma]

way to dig up an OLD topic,
but suprise suprise he still has the motor for sale AND the car still isnt done, i think i win my estimate of being done fall 06, though i still dont think itll be 100% done by then.

[mousemaker]

way to dig up an OLD topic,


Holy shit!

[Zion]

he has a tpi 305 that runs in the 13's for sale? HOW MUCH

[age]

High 13's in NOT hard to do at all... in a 305 TPI.

Speaking of which.. we do have a full 305 TPI long block that's sitting around.. if you wanna run in the high 13's, I believe that we've discussed this quite in depth before.

[Zion]

High 13's in NOT hard to do at all... in a 305 TPI.

Speaking of which.. we do have a full 305 TPI long block that's sitting around.. if you wanna run in the high 13's, I believe that we've discussed this quite in depth before.


yes we did, but with a 350tpi...

[Dizzle]

High 13's in NOT hard to do at all... in a 305 TPI.

Speaking of which.. we do have a full 305 TPI long block that's sitting around.. if you wanna run in the high 13's, I believe that we've discussed this quite in depth before.


how much for long block?

[age]

Zion: a 305 TPI to run high 13's wouldn't be that much harder.. believe me. Mind you, we're talking high 13's... obviously, if you wanna really start going faster, then the 305 will slowly start to show its limitations.

Tektrikz: we don't have a 305 longblock... I should've reworded myself properly and said that it's a 305 complete.

[Zion]

add me to msn!!!111

[89vert]

I'm sure that high 13's was with the nitrous :)

[age]

I've seen personally an 89 R7U car with ONLY K&N drop ins, 3" cat-free exhaust, a jacobs coil and suspension mods run 14.6 at Mission. Oh yeah.. full interior on street tires (not drag radials) with 16" rims.

If you do it intelligently, to break into the 13.9x is definately doable on a 305 TPI.

Obviously not all of it is going to come from HP... 3.73 gears, proper suspension setup, good tires, poly mounts, weight loss, advanced timing, etc... all of that can definately knock a bit off.

Oh yeah.. and a damn good driver.

[Zion]

Oh yeah.. and a damn good driver.


so... what your saying is... that im going to get high 16's? :'(


lol

[79 Z28]

I'm sure that high 13's was with the nitrous :)
nope, way back we rolled hard, 13's n/a lol

[age]

Oh yeah.. and a damn good driver.


so... what your saying is... that im going to get high 16's?* *:'(


lol


so, I guess my Honda is gonna take your Chevy? :evil: :naughty: :noes:

[Zion]

oh no :ohboy:


so since you are posting, does this mean the shop is open?

[89TPIcarguy]

motor still for sale ,,if so how much?

[age]

will ask mike tomorrow.. stay tuned..

zion: MUGEN power all the way!!

[89vert]

I'm sure that high 13's was with the nitrous :)
nope, way back we rolled hard, 13's n/a lol


he had nitous for that car didn't he?

[IROCNParts]

my players car (#19) ran 14.2
completely stock, with the side dumps closed........
If I could drive better id probably run faster

PS Adams 305 is still for sale
call him @ 604-812-8495

[Zion]

whats the hp rating on the r7u cars?

[79 Z28]

I'm sure that high 13's was with the nitrous :)
nope, way back we rolled hard, 13's n/a lol


he had nitous for that car didn't he?
yea, went 13.4's on a 100 shot street tires, spin fest